JL Audio CS110TG-TW3 TW3 10" 400W RMS (800W Peak Power Handling) Subwoofer with Sealed PowerWedge™ Enclosure
We are a JL Audio authorized dealer so you get up-to-date, fully warrantied products. Shipping is free to the lower 48 states on everything you order!
What's Inside?
- • CS110TG-TW3 Sealed subwoofer enclosure (loaded with one 10TW3-D4 woofer)
- • Black metal grille (installed)
- • Warranty information
- • Owner's Manual
Why Choose JL Audio CS110TG-TW3 Enclosed Car Subwoofer?
Amazing Sub-bass
The JL Audio CS110TG-TW3 is a compact and high-performance powered subwoofer enclosure designed to deliver impressive bass output for car audio enthusiasts. This all-in-one solution features a 10-inch TW3 subwoofer pre-installed in a compact, sealed enclosure and a built-in 400-watt Class D amplifier
Providing Deep and Accurate Bass Reproduction
The CS110TG-TW3's TW3 subwoofer is renowned for its shallow mounting depth and exceptional bass performance, making it an excellent choice for vehicles with limited space without compromising sound quality. The built-in Class D amplifier maximizes the subwoofer's potential, providing deep and accurate bass reproduction without requiring an external amplifier. The enclosure is expertly constructed using top-grade materials, minimizing resonance and ensuring long-lasting durability.
Easily Installed in Tight Spaces
With its compact design, the CS110TG-TW3 can be easily installed in tight spaces, under seats, or in the trunk, making it a versatile and convenient solution for those seeking enhanced bass performance without sacrificing valuable cabin space.
Delivers Impactful and Well-defined Bass
Whether you're into rap, rock, or electronic music, the JL Audio CS110TG-TW3 powered subwoofer enclosure delivers impactful and well-defined bass, elevating your car audio system to new heights. Enjoy a rich, immersive bass experience that enhances your driving journey, turning every road trip into a concert-like adventure.
Frequently Asked Questions (FAQ)
- • Why does the bass feel lacking or "thin" after installing this enclosure?
Since this is a small, sealed box, it relies heavily on proper tuning. Ensure your amplifier's subsonic filter is turned off, the low-pass filter is set around 80Hz, and verify your amp can properly handle the enclosure's 2-ohm impedance load.
- • What is the best amplifier pairing to get full performance without blowing the sub?
A mono amplifier supplying 300W to 500W RMS at 2 ohms is ideal, such as the JL Audio JD500/1 or RD500/1. Keep your gain moderately tuned to respect the subwoofer's 400W RMS maximum ceiling.
- • Will this wedge enclosure fit underneath the back seat of my crew cab truck?
Likely no. The "TG" denotes a Truck Wedge shape meant to stand vertically behind the seat of a regular cab truck. For tight under-seat applications, the flatter and wider CS110LG-TW3 model is recommended instead.
- • My sub is making a scratching noise when it hits low notes. Is the voice coil blown?
Gently press down evenly on the cone. If you feel a rough, scraping texture, the voice coil is likely warped or burned from amplifier clipping. If it moves smoothly, ensure the mesh grille isn't vibrating against the surround.
- • Can I remove the TW3 driver from this box and run it in a ported enclosure instead?
Yes, the 10TW3-D4 driver works well in small ported enclosures. However, because this specific pre-built box is strictly CNC-machined and engineered for sealed air space volume, you cannot easily modify the physical box itself to be ported.
- • Why is my amp cutting out or going into protect mode when playing this sub at high volumes?
This enclosure is wired to a 2-ohm load. If you are bridging a 2-channel amplifier or using an older amp that is only stable down to 4 ohms when bridged, the excessive current draw will trip protection mode. Ensure your amp is stable at 2 ohms mono.
- • The bass sounds great on rock music but feels empty on ultra-low rap or EDM tracks. Is the box too small?
Compact, sealed enclosures prioritize tight, punchy mid-bass precision over booming infrasonic rumble. If your target frequencies are consistently below 35Hz, you will need a larger, ported enclosure layout to get that extreme low-end extension.
- • The push terminals on the side of the box are loose and causing the audio to cut out. How can I fix this?
Heavy vibrations can loosen the terminal hardware over time. Unscrew the subwoofer driver to look inside, verify that the internal spade connectors are firmly attached to the terminals, and tighten the hardware securing the external posts.
Learn how to wire subwoofers
- Diameter : 10 Inch
- Sensitivity : 82 dB
- Impedance : 2 Ohm
- Frequency Response : 24-200 Hz
- Peak Power Handling : 800 Watts
- Number Of Subwoofers : 1
- Enclosure Type : Sealed
- Number of Voice Coils : Single
- RMS Power Handling : 400 Watts
Features:
- Compact Sealed Performance: Precision-tuned sealed enclosure loaded with one 10" TW3 subwoofer for tight, controlled bass in limited spaces.
- Premium MDF Construction: Built from rigid 5/8" medium-density fiberboard and wrapped in durable black carpet for long-term reliability.
- Steel-Mesh Protection: Integrated steel-mesh grille protects the subwoofer while maintaining a clean, aggressive look.
- Optimized 2 Ohm Load: 2 Ohm total impedance maximizes amplifier efficiency and power delivery.
- Power Handling Capability: Handles 100–400 watts RMS, delivering strong, distortion-free low-frequency output.
- Extended Low-Frequency Response: Wide 24–200 Hz frequency range provides deep bass impact with smooth mid-bass transition.
- High Output Efficiency: 82 dB sensitivity ensures solid output even with moderate amplifier power.
- Slim, Vehicle-Friendly Design: Compact dimensions at 19-1/8" W x 12-5/8" H x 6-1/2" D1 (7-1/4" with grille) x 4-3/8" D2 for easy installation.
Specifications:
- Woofer Size (inches): 10
- Speakers Per Box: 1
- Woofer Material: Mica-filled Poly
- Enclosure Type: Sealed
- Color: Black
- Pieces in System: 1
- Width (inches): 19-1/8
- Height (inches): 12-5/8
- Depth (inches): 7-1/4
- Connector Type: 5-way post
- Frequency Response: 24-200 Hz
- Power Range (Watts RMS): 400
- Maximum Wattage: Not Given
- Sensitivity: 82 dB
- Impedance: 2 ohms
- UPC: 699440933025
- Weight: 25
- Authorized Internet Dealer
Warranty: 2 Year(s) Warranty.
This item is accompanied by a manufacturer's warranty. If it is found to be defective, it may be returned to OnlineCarstereo.com for repair within 1 year from the original date of purchase with proper return authorization.
Do you own this product?
Write a review!
-
In my single cab truck with JL JD500/1 amp , this sub straight up thumps and it’s only a 10”
-
I have it paired with a JD500/1 and its delivering tight and clean lows. I love how it is much better than the Kicker sub I got before this one. Installing it in my Ranger was very easy too.
